Riccar 1800 User Manual download pdf (Page 7)

OPERATION

5. Warning Light / Dirt Sensor

Your power nozzle comes equipped with a

circuit breaker safety system that protects it

from a jammed power nozzle situation.

Common items that cause jammed brushrolls

include socks, excessive threads, corners of

area rugs, etc. The warning indicator light on

top of the unit (see diagram 8) will change from

green to red should this condition occur.

If the circuit breaker trips:

a. Turn off the vacuum cleaner and power nozzle

then unplug the power cord.

b. Remove the object preventing the brushroll

from turning.

c. Locate the circuit breaker switch on the back of

the power nozzle and press it to reset the

breaker (see diagram 9).

When the unit is turned back on, the warning light

should be green and ready to go. If the breaker trips

again, repeat steps a-c again to correct the problem.

If this does not correct the problem, contact

your authorized vacuum cleaner retailer for

further assistance.

6. Dirt Sensor

The warning indicator light will turn orange if

the dirt sensor detects dirt in the carpet and

will change to green when the carpet is clean.

MAINTENANCE AND CARE

1. Removing the Brushroll

IMPORTANT: Before performing any

maintenance work on the power nozzle,

always unplug the vacuum cleaner and

disconnect the wand.

Your brushroll may need to be removed at

times, for example, to cut threads that have

become tangled around the brushroll or to

replace the belt (see "Replacing the Belt").

To remove the brushroll, turn the unit over and

lift off the metal bottom plate by first

unscrewing the two bottom plate screws

located by the rear wheels (see diagram 10).

Pull out the belt cover guard (see diagram 11)

and pull the brushroll out.

To reinstall the brushroll, reinsert the brushroll

back into the unit (make sure the belt is

attached properly). Next, insert the belt cover

guard. Then, place the metal bottom plate

back onto the unit (insert the front end of the

bottom plate first). Re-insert the two bottom

plate screws and secure.

Diagram 8

Warning Light / Dirt Sensor Circuit Breaker Switch

Diagram 9

Bottom

Plate Screws

Diagram 10 Diagram 11

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comments to this Manuals

No comments

Riccar 1800 User Manual Page 7

Comments to this Manuals

Related products and manuals for Vacuum cleaners Riccar 1800